Manfrotto FF3512N86 Pantograph 2.0 with 5/8" Attachment

This Manfrotto FF3512N86 Pantograph is made of aluminum and has an attachments at both ends of the pantograph. It extends from a closed length of 10.6" (27cm) to a maximum extension of 6.5 feet (200cm). An accessory reliable for studio and sky track. It has a maximum load of 40 lb and it requires the use of the optional springs.

• It loads up to 26 lb and  can be suspended using only the friction device
• It comes with 5/8" (16 mm), female on the top and male on the bottom.
• Reliable accessories for professionals.

The pantograph is made of aluminium (P-Al MgSi UNI 3569) and manufactured according to DIN 15560-46. The attachments at both ends of the pantograph are 16mm, male on the bottom and female on the top. The load is supported by a steel cable of 2mm. diameter (safety factor 12). Loads up to 12Kg can be suspended using only the patented friction device, while loads up to a maximum of 18kg require the use of the optional springs. The pantograph can be regulated to keep suspended loads from 1 to 18kg perfectly balanced. By turning the coulored notched ring you can adjust the pantograph’s friction; this will ensure that the load remains stable when set in position, but that it will move smoothly up and down when necessary. In any case, it is always advisable to use the springs to aid raising your pantograph. When choosing the additional spring(s) for your pantograph, you will first need to know exactly which model of pantograph you have, in order that you can select the spring of the correct length. If you have one of the new compact pantographs (with grey-painted "scissors"), look at the colour of notched ring the 2m version has a red notched ring, while the 3.8m version has a blue notched ring. After having identified the length of the pantograph, choose the appropriate spring(s) by refering to the table below.

The colored notched ring can adjust the pantograph's friction; this will ensure that the load remains stable when set in position, but that it will move smoothly up and down when necessary. It is advisable to use springs to aid raising the pantograph.

When choosing the additional spring (s) for your pantograph, you will first need to know exactly which model of pantograph you have, in order that you can select the spring of the correct length. If you have the new compact pantograph, the TOP 2 version (above) has a red notched ring, while the TOP 4 version has a blue notched ring.

This is the Manfrotto FF3512N86 Pantograph with Wire Cable (Old Cat. No: 3250/2). The pantograph is made of aluminum and manufactured according to DIN 15560-46. The attachments at both ends of the pantograph are 5/8" (16 mm), female on the top and male on the bottom. The load is supported by a steel cable of 0.08 inch. diameter (safety factor 12). It extends from a closed length of 10.6" (27cm) to a maximum extension of 6.5 feet (200cm)

Loads of up to 26 lb can be suspended using only the friction device, while loads up to a maximum of 40 lb require the use of the optional springs. The pantograph can be adjusted to keep suspended loads from 2 lb to 10 lb perfectly balanced.

The colored notched ring can adjust the pantograph's friction; this will ensure that the load remains stable when set in position, but that it will move smoothly up and down when necessary. It is advisable to use springs to aid raising the pantograph.

When choosing the additional spring (s) for your pantograph, you will first need to know exactly which model of pantograph you have, in order that you can select the spring of the correct length. If you have the new compact pantograph, the TOP 2 version (above) has a red notched ring, while the TOP 4 version has a blue notched ring.